Aluminum Impeller Submersible Clean Water Pumps for Garden Use

Product Description

 

 

Product Description

 

QDX, QX Electric Submersible Pump 
Product introduction
QDX, QX series submersible pump consists of pump, mechanical seal and motor. Pump is at the bottom part of pump, which is adopted centrifugal impeller. Motor which is single-phase or three-phase is at the upper part of pump. Seal is used where pump and motor combine, which is a kind of double-end mechanical seal, O rings are applied to all static joints. Float switch can be equipped to control pump's starting and stopping automatically according to the water level.

Main Application
This series pump is small and light, which is widely used in countryside for elevating water from well, irrigation, sprinkling and domestic water supply, and also used in draining off water for fishpond and building site.

Work conditions
The pump can work properly and continuously under following operational conditions :
1. Medium is not corrosive, Sand contents should be max. 0.10% by volume and grannular size should be max. 0.2mm.
2. Medium temperature shouldn't be over 40°C and PH should be 6.5-8.5.
3. The pumps should be operated within rated head.
4. The pumps should be fully submerged into water with depth of less than 3m mad max. the pump should be min. 0.5mm over the water bottom and not be inserted into sludge.
5. Power frequency should be 50HZ, single phase voltage 220V, three-phase voltage 380V, and voltage fluctuation should be 0.9-1.1 times than the rated.

Features of  QDX Submersible Pump
1. 100% copper wire
2. Chrome-plated pump rotor (more resistant to wear and corrode)
3. Thermal protector
4. High-end bearing and mechanical seal
 

Material

 

Material

Structure of pump	Material	Can be selected
Pump body	Aluminum	Cast-Iron / Stainless steel
Impeller	Aluminum	/
Pump shaft	45 # Steel	/
Cable	/	Arbitrary length

 

Appellation	Model	Rated flow (m 3 /n)	Rated head(m)	Voltage(V)	Power(KW)	velocity(r/min)	pipe size
							(mm)	Inch
QDX Single -phase submersible pumps	QDX1.5-16-0.37	1.5	16	220	0.37	2860	25	1
	QDX3-20-0.55	3	20	220	0.55	2860	25	1
	QDX10-10-0.55	10	10	220	0.55	2860	40	1.5
	QDX15-7-0.55	15	7	220	0.55	2860	50	2
	QDX1.5-32-0.75	1.5	32	220	0.75	2860	25	1
	QDX7-18-0.75	7	18	220	1.75	2860	40	1.5
	QDX10-16-0.75	10	16	220	0.75	2860	50	2
	QDX15-10-0.75	15	10	220	0.75	2860	63	2.5
	QDX25-9-1.1	25	9	220	1.1	2860	63	2.5
	QDX40-6-1.1	40	6	220	1.1	2860	75	3
	QDX40-6-1.1T	40	6	220	1.1	2860	75	3
	QDX25-12-1.5T	25	12	220	1.5	2860	63	2.5
	QDX40-9-1.5T	40	9	220	1.5	2860	75	3
QX Trip hase Submersible Pump	QX3-20-0.55	3	20	380	0.55	3000	25	1
	QX10-10-0.55	10	10	380	0.55	3000	40	1.5
	QX15-7-0.55	15	7	380	0.55	3000	50	2
	QX1.5-32-0.75	1.5	32	380	0.75	3000	25	1
	QX7-18-0.75	7	18	380	0.75	3000	40	1.5
	QX10-16-0.75	10	16	380	0.75	3000	50	2
	QX15-10-0.75	15	10	380	0.75	3000	63	2.5
	QX25-9-1.1	25	9	380	1.1	3000	63	2.5
	QX40-6-1.1	40	6	380	1.1	3000	75	3
	QX40-6-1.1T	40	6	380	1.1	3000	75	3
	QX25-12-1.5T	25	12	380	1.5	3000	63	2.5
	QX40-9-1.5T	40	9	380	1.5	3000	75	3
	QX65-8-2.2	65	8	380	2.2	3000	100	4
	QX8-28-1.1T	8	28	380	1.1	3000	40	1.5
	QX15-15-1.1T	15	15	380	1.1	3000	50	2
	QX8-35-2.2T	8	35	380	2.2	3000	50	2
	QX9-22-2.2T	9	22	380	2.2	3000	50	2
	QX10-35-2.2T	10	35	380	2.2	3000	50	2
	QX12-45-3T	12	45	380	3.0	3000	50	2
	QX12-60-4T	12	60	380	4.0	3000	50	2
	QX12-70-5.5T	12	70	380	5.5	3000	50	2
	QX20-60/2-7.5T	20	60	380	7.5	3000	50	2
QDX New type Submersible	QDX6-12-0.4	6	12	220	0.4	2860	25/40	1/1.5
	QDX3-24-0.55	3	24	220	0.55	2860	25	1
	QDX3-30-0.75	3	30	220	0.75	2860	25	1
	QDX10-15-0.75T	10	15	220	0.75	2860	50	1.5/2
	QD10-15-0.75T	10	15	220/380	0.75	3000	50	1.5/2
	QDX7.8-15-0.75T	7.8	15	220/380	0.75	2800/3000	50	1.5/2
	QDX10-23-1.1T	10	23	220	1.1	2860	50	1.5/2
	QDX10-23-1.1T	10	23	220	1.1	3000	50	1.5/2
	WQDK10-18-1.1T	10	18	220	1.1	2860	50	1.5/2
	WDK10-18-1.1T	10	18	380	1.1	3800	50	1.5/2
QDX Low viols advead Submersible pump	QDX1.5-32-0.758	1.5	32	220	0.75	2860	25	1
	QDX10-16-0.75	10	16	220	1.1	2860	50	2
	QDX1.5-38-1.1T	1.5	38	220	1.1	2860	25	1
	QDX10-20-1.1T	10	20	220	1.1	2860	50	2
	QDX15-15-1.1T	15	15	220	1.1	2860	63	2.5
	QDX30-9-1.1T	30	9	220	1.1	2860	75	3
	QDX15-19-1.5T	15	18	220	1.5	2860	63	2.5
	QDX40-9-1.5T	40	9	220	1.5	2860	75	3
	QDX65-7-2.2T	65	7	220	2.2	2860	100	4

Packaging & Shipping

Packing & Shipping :

To avoid damp, inner layer wrapped with plastic paper
To lessen vibration, middle layer filled with foam
To avoild squeeze, motor are packed with plywood or wooden case
Customized package is also accept

Painting For Color Code

 

PAINTING COLOR CODE

Our Advantages

 

ADVANTAGE:
Pre-sales service: 
•We are a sales team, with all technical support from engineer team.
•We value every inquiry sent to us, ensure quick competitive offer within 24 hours.
•We cooperate with customer to design and develop the new products. Provide all necessary document.

After-sales service:
•We respect your feed back after receive the motors.
•We provide 1years warranty after receipt of motors..
•We promise all spare parts available in lifetime use.
•We loge your complain within 24 hours.
 

FAQ

FAQ:

Q:  How about the quality ?
A:  We use high quality raw material for production , and 100% QC in producing process before the goods being packed up . we sincerely expect to work with you for long and stable time . 

Q:  what's your payment term ?
A:  30% deposit before producing , 70% TT against BL copy .

Q:  What's your warranty ?
A:  One year warranty , detail as your requirement .

Q:  Could Iput my oun logo on it ?
A:  Sure , we can make your logo after you give us your authorization . 

Q:  Can I geta sample to chedk your quality and how long I can get samples ?
A:  Yes , very welcome and sample will be finished with in  7-14 days .

Q:  How about the delivery time ?
A:  30-60days after receipt of deposit .