YC-S-650 Good Permanent Magnet Variable Frequency Constant Pressure Pump

• Customization: Available
• Warranty: One year
• Max.Head: 10-30m
• Model NO.: YC-S-650
• Max.Capacity: 50-100 L/min
• Driving Type: Motor
• Impeller Number: Single-Stage Pump
• Working Pressure: High Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Position of Pump Shaft: Horizontal Pump
• Impeller: Open
• Usage: Pump, Pumps
• Rated head: 35m
• Rated flow: 2.5m3/h
• Max head: 55m
• Max traffic: 4.8m3/h
• Voltage: 180v~250V
• Transport Package: Carton
• Specification: 36X22X30.5cm
• Trademark: MOTAI
• Origin: Taizhou China
• HS Code: 841370

Product Description

Product description
YC-S Permanent Magnet Variable Frequency Constant Pressure Pump (Cold And Hot Water Type)
 
Usage scenarios

Home water supply, buildings, commercial housing, well water extraction, used in scenarios
where water needs to be sucked down andpressurized with tap water

Product attributes

The temperature of the conveying medium shall not exceed 90 C; The pH value of the medium is
between 6.5 and 8.5.
The volume ratio of solid impurities in water shall not exceed 0.1%, and the particle size shall not
exceed 0.2mm.     
 
Product size 

 

Hydraulic map

Performance parameter


 

 

 Application Sceneries
·Product Basic Questions
 
Q: In which scenarios are the permanent magnet variable frequency pumps of Yimai Zhihui mainly applied?
A: They are suitable for scenarios such as domestic water supply, commercial circulation systems, agricultural irrigation, industrial cooling, etc. Specific models can be selected according to the requirements of flow rate and head.

Q: What are the advantages of permanent magnet variable frequency pumps compared to traditional water pumps?
A: They can save 30% to 50% of energy, have lower noise, intelligent speed regulation, a longer service life, and support remote monitoring (for some models).
 
·Installation and Debugging
 
Q: What precautions should be taken when installing the water pump?
A:
1. Ensure that the installation foundation is flat and stable;
2. Install a filter at the water inlet (to prevent impurities from damaging the impeller);
3. The motor shaft must be placed horizontally;
4. Check whether the power supply voltage matches (such as 220V/380V) after wiring.