Customization: | Available |
---|---|
Warranty: | 12months |
Max.Head: | 30-50m |
Still deciding? Get samples of US$ 18/Piece
Order Sample
|
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
|
---|---|
Support payments in USD |
Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Product introduction
QDX, QX series submersible pump consists of pump, mechanical seal and motor. Pump is at the bottom part of pump, which is adopted centrifugal impeller. Motor which is single-phase or three-phase is at the upper part of pump. Seal is used where pump and motor combine, which is a kind of double-end mechanical seal, O rings are applied to all static joints. Float switch can be equipped to control pump's starting and stopping automatically according to the water level.
Main Application
This series pump is small and light, which is widely used in countryside for elevating water from well, irrigation, sprinkling and domestic water supply, and also used in draining off water for fishpond and building site.
Work conditions
The pump can work properly and continuously under following operational conditions :
1. Medium is not corrosive, Sand contents should be max. 0.10% by volume and grannular size should be max. 0.2mm.
2. Medium temperature shouldn't be over 40°C and PH should be 6.5-8.5.
3. The pumps should be operated within rated head.
4. The pumps should be fully submerged into water with depth of less than 3m mad max. the pump should be min. 0.5mm over the water bottom and not be inserted into sludge.
5. Power frequency should be 50HZ, single phase voltage 220V, three-phase voltage 380V, and voltage fluctuation should be 0.9-1.1 times than the rated.
Features of QDX Submersible Pump
1. 100% copper wire
2. Chrome-plated pump rotor (more resistant to wear and corrode)
3. Thermal protector
4. High-end bearing and mechanical seal
Material
Structure of pump |
Material | Can be selected |
Pump body | Aluminum | Cast-Iron / Stainless steel |
Impeller | Aluminum | / |
Pump shaft | 45 # Steel | / |
Cable | / | Arbitrary length |
Appellation |
Model | Rated flow (m 3 /n) |
Rated head(m) | Voltage(V) | Power(KW) | velocity(r/min) | pipe size |
|
(mm) | Inch | |||||||
QDX Single -phase submersible pumps |
QDX1.5-16-0.37 | 1.5 | 16 | 220 | 0.37 | 2860 | 25 | 1 |
QDX3-20-0.55 | 3 | 20 | 220 | 0.55 | 2860 | 25 | 1 | |
QDX10-10-0.55 | 10 | 10 | 220 | 0.55 | 2860 | 40 | 1.5 | |
QDX15-7-0.55 | 15 | 7 | 220 | 0.55 | 2860 | 50 | 2 | |
QDX1.5-32-0.75 | 1.5 | 32 | 220 | 0.75 | 2860 | 25 | 1 | |
QDX7-18-0.75 | 7 | 18 | 220 | 1.75 | 2860 | 40 | 1.5 | |
QDX10-16-0.75 | 10 | 16 | 220 | 0.75 | 2860 | 50 | 2 | |
QDX15-10-0.75 | 15 | 10 | 220 | 0.75 | 2860 | 63 | 2.5 | |
QDX25-9-1.1 | 25 | 9 | 220 | 1.1 | 2860 | 63 | 2.5 | |
QDX40-6-1.1 | 40 | 6 | 220 | 1.1 | 2860 | 75 | 3 | |
QDX40-6-1.1T | 40 | 6 | 220 | 1.1 | 2860 | 75 | 3 | |
QDX25-12-1.5T | 25 | 12 | 220 | 1.5 | 2860 | 63 | 2.5 | |
QDX40-9-1.5T | 40 | 9 | 220 | 1.5 | 2860 | 75 | 3 | |
QX Trip hase Submersible Pump |
QX3-20-0.55 | 3 | 20 | 380 | 0.55 | 3000 | 25 | 1 |
QX10-10-0.55 | 10 | 10 | 380 | 0.55 | 3000 | 40 | 1.5 | |
QX15-7-0.55 | 15 | 7 | 380 | 0.55 | 3000 | 50 | 2 | |
QX1.5-32-0.75 | 1.5 | 32 | 380 | 0.75 | 3000 | 25 | 1 | |
QX7-18-0.75 | 7 | 18 | 380 | 0.75 | 3000 | 40 | 1.5 | |
QX10-16-0.75 | 10 | 16 | 380 | 0.75 | 3000 | 50 | 2 | |
QX15-10-0.75 | 15 | 10 | 380 | 0.75 | 3000 | 63 | 2.5 | |
QX25-9-1.1 | 25 | 9 | 380 | 1.1 | 3000 | 63 | 2.5 | |
QX40-6-1.1 | 40 | 6 | 380 | 1.1 | 3000 | 75 | 3 | |
QX40-6-1.1T | 40 | 6 | 380 | 1.1 | 3000 | 75 | 3 | |
QX25-12-1.5T | 25 | 12 | 380 | 1.5 | 3000 | 63 | 2.5 | |
QX40-9-1.5T | 40 | 9 | 380 | 1.5 | 3000 | 75 | 3 | |
QX65-8-2.2 | 65 | 8 | 380 | 2.2 | 3000 | 100 | 4 | |
QX8-28-1.1T | 8 | 28 | 380 | 1.1 | 3000 | 40 | 1.5 | |
QX15-15-1.1T | 15 | 15 | 380 | 1.1 | 3000 | 50 | 2 | |
QX8-35-2.2T | 8 | 35 | 380 | 2.2 | 3000 | 50 | 2 | |
QX9-22-2.2T | 9 | 22 | 380 | 2.2 | 3000 | 50 | 2 | |
QX10-35-2.2T | 10 | 35 | 380 | 2.2 | 3000 | 50 | 2 | |
QX12-45-3T | 12 | 45 | 380 | 3.0 | 3000 | 50 | 2 | |
QX12-60-4T | 12 | 60 | 380 | 4.0 | 3000 | 50 | 2 | |
QX12-70-5.5T | 12 | 70 | 380 | 5.5 | 3000 | 50 | 2 | |
QX20-60/2-7.5T | 20 | 60 | 380 | 7.5 | 3000 | 50 | 2 | |
QDX New type Submersible |
QDX6-12-0.4 | 6 | 12 | 220 | 0.4 | 2860 | 25/40 | 1/1.5 |
QDX3-24-0.55 | 3 | 24 | 220 | 0.55 | 2860 | 25 | 1 | |
QDX3-30-0.75 | 3 | 30 | 220 | 0.75 | 2860 | 25 | 1 | |
QDX10-15-0.75T | 10 | 15 | 220 | 0.75 | 2860 | 50 | 1.5/2 | |
QD10-15-0.75T | 10 | 15 | 220/380 | 0.75 | 3000 | 50 | 1.5/2 | |
QDX7.8-15-0.75T | 7.8 | 15 | 220/380 | 0.75 | 2800/3000 | 50 | 1.5/2 | |
QDX10-23-1.1T | 10 | 23 | 220 | 1.1 | 2860 | 50 | 1.5/2 | |
QDX10-23-1.1T | 10 | 23 | 220 | 1.1 | 3000 | 50 | 1.5/2 | |
WQDK10-18-1.1T | 10 | 18 | 220 | 1.1 | 2860 | 50 | 1.5/2 | |
WDK10-18-1.1T | 10 | 18 | 380 | 1.1 | 3800 | 50 | 1.5/2 | |
QDX Low viols advead Submersible pump |
QDX1.5-32-0.758 | 1.5 | 32 | 220 | 0.75 | 2860 | 25 | 1 |
QDX10-16-0.75 | 10 | 16 | 220 | 1.1 | 2860 | 50 | 2 | |
QDX1.5-38-1.1T | 1.5 | 38 | 220 | 1.1 | 2860 | 25 | 1 | |
QDX10-20-1.1T | 10 | 20 | 220 | 1.1 | 2860 | 50 | 2 | |
QDX15-15-1.1T | 15 | 15 | 220 | 1.1 | 2860 | 63 | 2.5 | |
QDX30-9-1.1T | 30 | 9 | 220 | 1.1 | 2860 | 75 | 3 | |
QDX15-19-1.5T | 15 | 18 | 220 | 1.5 | 2860 | 63 | 2.5 | |
QDX40-9-1.5T | 40 | 9 | 220 | 1.5 | 2860 | 75 | 3 | |
QDX65-7-2.2T | 65 | 7 | 220 | 2.2 | 2860 | 100 | 4 |
Packing & Shipping :
To avoid damp, inner layer wrapped with plastic paper
To lessen vibration, middle layer filled with foam
To avoild squeeze, motor are packed with plywood or wooden case
Customized package is also accept