SU series sdlf-priming agricultural pump 50,80,100 2′′ 3′′ 4′′

Product Description

 

Product Brier :

SU series self-priming agricultural pump by aluminum alloy pump shell and wear-resistant high strength cast iron impeller combination , can be suitable for all kinds of motor drive . The series is widely used in irrigation , sprinkler irrigation , garden soaking irrigation , aquaculture water supply and drainage and other occasions due to its beautiful and lightweight , large water outpur , long distance water delivery , fast self-imbibition speed and so on .


Technical Parameter :

3"  Seawater special tow pump

Model :                               SU-80               
Power (kw/HP) :                  4/5.5                
Lift (m) :                               36                    
Suction course (m) :              8                   
Flow (m3/h) :                        60                    
Rotational speed (r/min) :      3600                 
 

 

2"  Trailer pump

Model :                               SU-50                   
Power (kw/HP) :                  3/4.0                    
Lift (m) :                              36                        
Suction course (m) :             8                          
Flow (m³/h) :                       33                         
Rotational speed (r/min) :     3600                      

 

3"  Trailer pump

Model :                           SU-80                       
Power (kw/hp) :               4 /5.5                       
Lift (m) :                            36                          
Suction course (m) :           8                            
Flow (m³/h) :                     60                           
Rotational speed (r/min) :             3600              

4''  Trailer pump

Model :                            SU-100          
Power (kw/hp) :                5.5/7.5          
Lift (m) :                             28               
Suction course (m) :            8                 
Flow (m³/h) :                       73               
Rotational speed (r/min) :     3600           

 

3"  Single impeller high pressure drag pump

Model :                              THP-80                  
Power (kw/hp) :                     7.5/10                
Loft (m) :                                75                     
Suction course (m) :                 6                      
Flow (m³/h) :                           52                    
Rotational speed (r/min) :        3600                  

 

2''  Double impeller high pressure drag pump

Model :                                  2THP-50              
Power (kw/hp) :                         5.5/7.5             
Lift (m) :                                     80                   
Suction course (m) :                     6                    
Flow (m³/h) :                               30                  
Rotational speed (r/min) :           3600                
 

  

Production display  :
 

Each pump has been tested by closed pressure ,safe and reliable .

Show product application scenarios :


Attention : The first use must be used with water in the pump body . Please use                   a hard pipe at the inlet , the interface must be sealed and not leaking .

Installation and precautions of water pump : 
1. Select a strong place and pump the unit flat .
2. Check whether the bolts and nuts of the machine pump are loose .
3. The installation position of the pump , should be as close to the water source , close to the water surface , in order to shorten the inlet pipe . 
4. Motor supporting , should pay attention to the safety of electricity , and reliable grounding , prevent electric shock . Check whether the steering of the pump is correct .
5. When the diesel engine is sirectly connected or the belt rotates , the pump with the correct direction should be selected and maintained according to the diesel enging insructions . 
6. The direction indicated by the arrow shall prevail , and the reverse operration is strictly prohibited .
7. It is recommended that the speed should not exceed 4000RPM . Please rrefer to the parameters on the nameplate of the pump body for the power and speed of the supporting motor and steam (siesel) oil machine .
8. The matching motor belt plate and belt should be consistent with the model on the pump .
9. The water pump must be fixed before working , and keep a space above 0.8meters with the supporting motor .



Packing & Shipping :

To avoid damp, inner layer wrapped with plastic paper
To lessen vibration, middle layer filled with foam
To avoild squeeze, motor are packed with plywood or wooden case
Customized package is also accept



 

PAINTING COLOR CODE


ADVANTAGE:
Pre-sales service: 
•We are a sales team, with all technical support from engineer team.
•We value every inquiry sent to us, ensure quick competitive offer within 24 hours.
•We cooperate with customer to design and develop the new products. Provide all necessary document.

After-sales service:
•We respect your feed back after receive the motors.
•We provide 1years warranty after receipt of motors..
•We promise all spare parts available in lifetime use.
•We loge your complain within 24 hours.