ZB5-45 Good Permanent Magnet Variable Frequency Constant Pressure Pump High-lift

• Customization: Available
• Warranty: One year
• Certification: ISO
• Model NO.: ZB5-45
• Installation Method: Horizontal
• Power: Electric
• Material: Fluoroplastics
• Working Fluid: Water
• Performance: Health
• Applications: Family
• Rated head: 23m
• Rated flow: 3.0m3/h
• Max head: 45m
• Max flow: 5.0m3/h
• Voltage: 180v~250V
• Transport Package: Carton
• Specification: 34X23X27cm
• Trademark: MOTAI
• Origin: Taizhou China
• HS Code: 841370

Product Description

Product description
ZB Permanent Magnet Variable Frequency Constanct Pressure Pump 
Usage Scenarios 
Home water supply, buildings, commercial
housing, well water extraction, used in scenarios where water needs to be sucked down and pressurized with tap water

Product Attributes
The temperature of the conveying medium shall not exceed 70 ºC; The pH value of the medium is between 6.5 and 8.5.
The volume ratio of solid impurities in water shall not exceed 0.1%, and the particle size shall not exceed 0.2mm.

 

Product size

Hydraulic map

Performance parameter


 

 

 Product Description·Product Basic Questions
 
Q: In which scenarios are the permanent magnet variable frequency pumps of Yimai Zhihui mainly applied?
A: They are suitable for scenarios such as domestic water supply, commercial circulation systems, agricultural irrigation, industrial cooling, etc. Specific models can be selected according to the requirements of flow rate and head.

Q: What are the advantages of permanent magnet variable frequency pumps compared to traditional water pumps?
A: They can save 30% to 50% of energy, have lower noise, intelligent speed regulation, a longer service life, and support remote monitoring (for some models).
 
·Installation and Debugging
 
Q: What precautions should be taken when installing the water pump?
A:
1. Ensure that the installation foundation is flat and stable;
2. Install a filter at the water inlet (to prevent impurities from damaging the impeller);
3. The motor shaft must be placed horizontally;
4. Check whether the power supply voltage matches (such as 220V/380V) after wiring.